RUD
Products and Services
Lifting and lashing equipment
Lifting points
ACP-TURNADO - UNC thread with variable length

ACP-TURNADO - UNC thread with variable length

The world’s first smart lifting point

Large WLL range 1.35 t – 8 t.
Higher WLL than comparable design sizes.
Unique RUD spring mechanism.
Stuck position of suspension ring avoided.
No dangerous transverse loads.
No kinks.
Pivots 180°.
Swivels 360°.

1 Safety factor (e. g. 4:1) for lifting means (safety against breakage).

1 Safety factor (e. g. 5:1) for lifting means (safety against breakage).

All load-bearing elements are 100 % electromagnetically crack-tested.

Loadable on all sides: Lifting points which can be loaded in all conceivable directions or which automatically turn into the load direction.

The lifting point can be rotated by 360°. However, this is not to be equated with rotating and turning under load!

The lifting point has a pivoting area in the suspension link of 180°.

Possible thread types of the respective lifting point. Symbols according to: UNC INCH THREAD

Meets and exceeds the requirements of the American standard ASME B30.26.

Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

The lifting points with this symbol are equipped with the ICE-BOLT.

Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction.

Operating temperature range of the lifting means without permanent reduction of load capacity.

The lifting point is available with variable/different thread lengths.

Product variant (11)

ACP-TURNADO SUPERMAX-32.5t-4"-4UNC with variable length (102-300)

Article number: 8600649

Attribute	Value
WLL	32.500 kg
Weight
size A	124 mm
size B	45 mm
size C	45 mm
size D	103 mm
size E	120 mm
size F vario	102-300
size G	116 mm
size H vario	218-416
size I	75 mm
size K	204 mm
size M	4"-4UNC
size N	24 mm
pitch T	240 mm

Related downloads

Please use the contact form for further questions about our products and services.

ACP-32,5t-4"-4UNC L-max - IGES 3D CAD File

(ZIP, 5 MB)
ACP-32,5t-4"-4UNC L-max - STEP 3D CAD File

(ZIP, 982 KB)
ACP-32,5t-4"-4UNC L-max - DXF 2D CAD File

(ZIP, 70 KB)
Instruction handbook ACP-TURNADO

(PDF, 3 MB)
Notice d'utilisation ACP-TURNADO

(PDF, 3 MB)
Istruzioni d'uso ACP-TURNADO

(PDF, 3 MB)
manual de instrucciones ACP-TURNADO

(PDF, 3 MB)
PDF-Info-ACP-TURNADO-32,5t-4"-4UNC-Vario-en

(PDF, 123 KB)
PDF-Info-ACP-TURNADO-32,5t-4"-4UNC-Vario-fr

(PDF, 124 KB)
PDF-Info-ACP-TURNADO-32,5t-4"-4UNC-Vario-it

(PDF, 124 KB)
PDF-Info-ACP-TURNADO-32,5t-4"-4UNC-Vario-es

(PDF, 124 KB)

Show 11-11 of 11

« ‹ 1 2 3 › »