RUD
Products and Services
Lifting and lashing equipment
Lifting points
ACP-TURNADO OCEANSTAR - metric

ACP-TURNADO OCEANSTAR - metric

The first DNV-certified lifting point for underwater applications.

Certified according to DNV-ST-0377 and
DNV-ST-0378
Approved for subsea use
Zinc flake coating for maximum corrosion resistance
720‪‬ h salt spray test resistance
Captive but exchangeable 10.9 bolt
Max. Hardness 38 HRC
Load capacity marking with safety factor 4:1 and 5:1
Meets the requirements of the American standard ASME B30.26

1 Safety factor (e. g. 4:1) for lifting means (safety against breakage).

1 Safety factor (e. g. 5:1) for lifting means (safety against breakage).

All load-bearing elements are 100 % electromagnetically crack-tested.

Loadable on all sides: Lifting points which can be loaded in all conceivable directions or which automatically turn into the load direction.

The lifting point can be rotated by 360°. However, this is not to be equated with rotating and turning under load!

The lifting point has a pivoting area in the suspension link of 180°.

Possible thread types of the respective lifting point. Symbols according to: METRIC THREAD

Meets and exceeds the requirements of the American standard ASME B30.26.

Easy testing and documentation. With the RUD BLUE-ID system (equipped with an RFID chip).

Maximum operating temperature of the lifting means with percentage, product-dependent load capacity reduction.

Operating temperature range of the lifting means without permanent reduction of load capacity.

DNV-approved. This product is suitable for marine and offshore applications.

Product variant (7)

ACP-TURNADO OCEANSTAR-5t-M24

Article number: 7909318

Attribute	Value
WLL	5.000 kg
Weight	3,27 kg
size B	23 mm
size C	23 mm
size D	66 mm
size E	60 mm
size F	25 mm
size G	55 mm
size H	104 mm
size I	36 mm
size K	121 mm
size L	80 mm
size M	M24
size N	14 mm
pitch T	154 mm

Related downloads

Please use the contact form for further questions about our products and services.

ACP-TURNADO OCEANSTAR-5t-M24 - DXF 2D CAD File

(ZIP, 34 KB)
ACP-TURNADO OCEANSTAR-5t-M24 - IGES 3D CAD File

(ZIP, 3 MB)
ACP-TURNADO OCEANSTAR-5t-M24 - STEP 3D CAD File

(ZIP, 727 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-5t-M24-en

(PDF, 149 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-5t-M24-fr

(PDF, 150 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-5t-M24-it

(PDF, 150 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-5t-M24-es

(PDF, 150 KB)

ACP-TURNADO OCEANSTAR-8t-M30

Article number: 7909319

Attribute	Value
WLL	8.000 kg
Weight	5,7 kg
size B	29 mm
size C	27 mm
size D	76 mm
size E	75 mm
size F	41,5 mm
size G	68,5 mm
size H	129 mm
size I	46 mm
size K	148 mm
size L	110 mm
size M	M30
size N	17 mm
pitch T	183 mm

Related downloads

Please use the contact form for further questions about our products and services.

ACP-TURNADO OCEANSTAR-8t-M30 - DXF 2D CAD File

(ZIP, 37 KB)
ACP-TURNADO OCEANSTAR-8t-M30 - IGES 3D CAD File

(ZIP, 3 MB)
ACP-TURNADO OCEANSTAR-8t-M30 - STEP 3D CAD File

(ZIP, 778 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-8t-M30-en

(PDF, 149 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-8t-M30-fr

(PDF, 150 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-8t-M30-it

(PDF, 150 KB)
PDF-Info-ACP-TURNADO OCEANSTAR-8t-M30-es

(PDF, 150 KB)

Show 6-7 of 7

« ‹ 1 2 › »