VIP plug in connector

VIP-Plug-in connector.

  • VERG – for use as a push-in bolt for tool transport or similar lifting methods. In all the places, where only drilled holes are possible to take the load.
  • Minimum Ø D see table, minimum bolt length L is 2 x D. Maximum Ø D = 48 mm.
  • Drilled hole diameter = D + 1 mm. Recommended in connection with a spreader bar or cross beam for vertical lifting.

Product variant (5)

VIP-Plug-in Connector VERG-6

Article number: 8600130

VIP-Plug-in Connector VERG-8

Article number: 8600131

VIP-Plug-in Connector VERG-10

Article number: 8600132

VIP-Plug-in Connector VERG-13

Article number: 8600133

VIP-Plug-in Connector VERG-16

Article number: 8600134