VIP-Swivel connector VWA

VIP-Swivel connector.

  • The DGUV rule prescribes: Lifting means must not be twisted before lifting – this is done automatically by VWA.
  • Ball-bearing mounted – rotatable under load!
  • Not suitable for permanent operation under full load.Can be mounted non-mix-up thanks to the adapter bar with all VIP-Clevis connection parts. Non-susceptible to dirt thanks to seal. NO WLL on bending. Install the VWA so that no bending can occur on the adapter during use.

Product variant (2)

VIP-Swivel connector VWA-20

Article number: 7990723

VIP-Swivel connector VWA-22

Article number: 7100634