ICE Balancer

ICE-Balancer.

  • Balancer connection at top: Connection by shackles.
  • Balancer connection at bottom: ICE-Connection links.
  • Easy recognition of the limit tilt angle of 10° due to special shaping on the bottom of the balancer.
  • Detailed information on the ICE-Balancer can be found in the operating manual.

PLEASE NOTE THE FOLLOWING WHEN USING

THE ICE-BALANCER SUSPENSION:

  • The load must be symmetrical.
  • The inclination angle β must not be greater than 45° (see diagrams 1 and 2).
  • The inclination of the balancer must not be greater than 10° (see diagrams 3, 4 and 5).
  • Detailed information on the ICE-Balancer can be found in the operating manual.
  • Higher WLL at β = 15° or β = 30° see operating manual.

With a 4-strand suspension, a maximum of only 3 strands can be assumed to be load-bearing. In unfavourable cases only 2 strands are used.

Our TIP:

When using a 2 x 2-strand suspension in the configuration shown, an even load distribution to all 4 strands and a 33 % higher WLL than a standard 4-strand suspension.

DESIGN OF ICE-BALANCER HEAD IWK-2S

CONSISTING OF:

  • IA link with IKZA.
  • VIP-Shackles.
  • ICE-Balancer.
  • 2 ICE-Connecting links.

Product variant (5)

ICE rocker IW-6

Article number: 7904367

ICE rocker IW-8

Article number: 7904370

ICE rocker IW-10

Article number: 7904372

ICE rocker IW-13

Article number: 7904375

ICE rocker IW-16

Article number: 7904255