NEW | Chain connector UKS

One connector for all conveying tasks with round link chains

The new RUD chain connector UKS is versatile in combination with the round steel link chain and replaces the connectors RSP, VK and FL. This means less storage for you and a reduction in your total cost of ownership. Easy and quick installation by a single person significantly reduces downtime caused by installation or repair of all types of conveyors. The application hardness of the UKS connector corresponds to the quality R80 to R160. The increased tooth cross sections (and the splitting of the cross section of the connecting teeth) serve for a safe power transmission. To avoid damage when driving over the sprockets, the lock shape of the chain link width has been adjusted.

• Easy and quick installation through one person (only 3 parts)
• Case hardening is matching RUD qualities R80-R160
• Fits RUD pocket- and sprocket wheels
• Improved teeth design avoiding fractures
• Observing a fastening torque is no longer necessary
• One connector for all conveying tasks with round steel link chains
   → This means reduced stock holding, less part numbers in purchasing
• Easier and quicker installation
   → This means reduced down times with installation and repair of all types of conveyors
• No mandatory assembly direction, as it runs over pocket- and sprocket wheels
• The new connectors reduce your total cost of ownership

• Vertical Conveyors (e.g. bucket elevators)
• Horizontal Conveyors (e.g. scraper conveyors for de-ashing or other applications)
• For multipurpose use in Round Link Chains
• Replacing VK, RSP, FL

Step 1

Turn the locking pin out of the connector through 90° by means of a hex-wrench.

step 2

Insert the connector shackles into the chain.

Step 3

Hook in the toothing.

Step 4

Insert the locking pin flush into the connector. Be aware of the position of the cam - in parallel to the flights of the inner sides of the connector schackles (2).

Step 5

Turn the locking pin through 90° by means of a hex wrench. When turning you must feel a hard point in order to positively locking the pin.

*Assembly:
From UKS 22, the installation takes place according to the proven art improved by a centralized guiding.

Chain connector VK

Chain connector VK

For use in single and multiple-strand conveyors from medium to heavy duty conditions.

Chain connector RSP

Chain connector RSP

For use in single and multiple-strand conveyors of medium operating conditions.

Chain connector FL

Chain connector FL

The flat connector for use in single and multiple-strand conveyors.

Bucket attachment System 65

Bucket attachment System 65

With integrated wear mark.

System bucket attachment 2win

System bucket attachment 2win

The backwall bucket attachment for use up to 60 m in height.

System bucket attachment RUca

System bucket attachment RUca

The RUD alternative to the DIN system.

System bucket attachment SWA

System bucket attachment SWA

For using in slow-running bucket elevators.

Drive wheel, thoothed

Drive wheel, thoothed

Reversing wheel for system 65

Reversing wheel for system 65

Drive wheel, non thoothed

Drive wheel, non thoothed

Chain wheel for bucket elevator for RUca, 2win and SWA

Chain wheel for bucket elevator for RUca, 2win and SWA

Contact form

Contact form

Should you require further information or have any questions, we would be pleased to help you personally further.